Fred Rose Fred Rose's Profile Page

Fred Rose Fred Rose

0 Course Enrolled • 0 Course Completed

Biography

Reliable Fortinet NSE5_FSW_AD-7.6 Practice Questions & New NSE5_FSW_AD-7.6 Test Topics

To help you learn with the newest content for the NSE5_FSW_AD-7.6 preparation materials, our experts check the updates status every day, and their diligent works as well as professional attitude bring high quality for our NSE5_FSW_AD-7.6 practice materials. You may doubtful if you are newbie for our NSE5_FSW_AD-7.6 training engine, free demos are provided for your reference. The free demo of NSE5_FSW_AD-7.6 exam questions contains a few of the real practice questions, and you will love it as long as you download and check it.

Fortinet NSE5_FSW_AD-7.6 Exam Syllabus Topics:

Topic
Details

Topic 1

Deployment and management: This domain includes provisioning and deploying FortiSwitch in supported topologies, including multi-tenancy environments. It emphasizes proper setup, scalability, and centralized management.

Topic 2

FortiSwitch concepts: This domain covers core FortiSwitch features including VLAN configuration, QoS, LLDP-MED, stacking, switching and routing, STP for loop prevention, and port and transceiver configuration. It focuses on essential switching operations and network integration.

Topic 3

Layer 2 control and security: This section focuses on Layer 2 security features such as port security, filtering, antispoofing, ACLs, security profiles, and VLAN security mechanisms to protect switched networks.

Topic 4

Monitoring and troubleshooting: This domain covers packet capture methods, FortiLink troubleshooting, and diagnostic tools used to monitor traffic and resolve network issues.

>> Reliable Fortinet NSE5_FSW_AD-7.6 Practice Questions <<

New NSE5_FSW_AD-7.6 Test Topics, NSE5_FSW_AD-7.6 Valid Exam Sims

If you want to learn the NSE5_FSW_AD-7.6 practice guide anytime, anywhere, then we can tell you that you can use our products on a variety of devices. As you can see on our website, we have three different versions of the NSE5_FSW_AD-7.6 exam questions: the PDF, Software and APP online. Though the content of them are the same. But the displays are totally different. And you can use them to study on different time and conditions. If you want to know them clearly, you can just free download the demos of the NSE5_FSW_AD-7.6 Training Materials!

Fortinet NSE 5 - FortiSwitch 7.6 Administrator Sample Questions (Q28-Q33):

NEW QUESTION # 28
Refer to the exhibit.

PC1 connected to port1 has joined multicast group 225.1.2.3 on VLAN 10 with IGMP snooping enabled.
What will happen if you disable IGMP snooping on FortiSwitch? (Choose one answer)

A. PC1 will be removed from the multicast group 225.1.2.3.
B. Multicast traffic will stop until a multicast receiver is detected.
C. Multicast traffic for 225.1.2.3 will be flooded to all ports.
D. The FortiSwitch will stop processing IGMP report join messages.

Answer: C

Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, Internet Group Management Protocol (IGMP) snooping is a Layer 2 mechanism that allows a switch to "listen" to IGMP conversations between hosts and routers to maintain a map of which ports require specific multicast streams. When IGMP snooping is enabled, the switch populates aMulticast Layer 2 Forwarding Table(as shown in the exhibit), which ensures that multicast traffic is only forwarded to ports where a receiver has explicitly requested it (e.g., PC1 on port1).
When IGMP snooping isdisabled, the switch no longer maintains this granular forwarding table. By default, a Layer 2 switch that is not performing IGMP snooping treats multicast traffic as if it werebroadcast traffic.
Consequently, instead of being intelligently forwarded only to the interested receiver (PC1), the multicast traffic for group 225.1.2.3 will beflooded to all portswithin the same VLAN (VLAN 10). This means PC2, even if it has not joined the group, will receive the multicast packets at the physical layer, leading to unnecessary bandwidth consumption and increased CPU load on unintended recipients.
The documentation explicitly states that disabling IGMP snooping reverts the switch to a "flood-all" behavior for multicast frames within the broadcast domain. Option A is incorrect because the host (PC1) remains a member of the group; only the switch's forwarding logic changes. Option B is incorrect as the switch may still see the messages but will not act on them to prune ports. Option D is incorrect as disabling the feature removes the prune/stop mechanism, causing traffic to flow everywhere rather than stopping.

NEW QUESTION # 29
(Full question statement start from here)
What is one key advantage of using a sniffer profile on FortiSwitch compared to using the sniffer command?
(Choose one answer)

A. It allows packet capture on all switch ports without limitations.
B. It automatically filters irrelevant traffic types.
C. It automatically decrypts SSL/TLS traffic for full packet inspection.
D. It eliminates the need to use access control lists (ACLs) or port mirroring for analysis.

Answer: A

Explanation:
FortiSwitchOS 7.6 provides two primary mechanisms for packet capture: thesniffer commandand thesniffer profile. While both are used for traffic analysis and troubleshooting, the FortiSwitchOS 7.6 Administrator Guide clearly identifies a key advantage of using asniffer profileover the CLI-based sniffer command.
According to the documentation (Page 438), a sniffer profile allows administrators tocapture packets from all switch ports simultaneously, without being constrained to a single interface or requiring repeated command execution. This capability makes sniffer profiles particularly effective for broad troubleshooting scenarios, such as identifying intermittent issues, unknown traffic sources, or network-wide anomalies across multiple ports and VLANs.
In contrast, the diagnose sniffer packet command is executed manually and typically focuses on a specific interface or traffic flow, requiring administrators to explicitly define capture parameters each time. This makes it less efficient when comprehensive visibility across the switch is required.
Sniffer profiles are also designed to bepersistent and reusable, meaning they can remain configured and enabled as needed without continuous CLI interaction. This is especially beneficial in production environments where consistent monitoring across all ports is necessary while minimizing administrative overhead.
The other answer choices are incorrect because sniffer profiles do not eliminate the need for ACLs or port mirroring, do not inherently filter traffic automatically, and do not provide SSL/TLS decryption, which is outside the functional scope of FortiSwitch.
Therefore, based on FortiSwitchOS 7.6 Administrator Guide (Page 438), the correct and fully verified answer isA. It allows packet capture on all switch ports without limitations.

NEW QUESTION # 30
Which QoS mechanism maps packets with specific class of service (COS) or Differentiated Services Code Point (DSCP) markings to an egress queue? (Choose one answer)

A. Shaping for egress traffic
B. Queuing for egress traffic
C. Policing for ingress traffic
D. Classification for ingress traffic

Answer: B

Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, Quality of Service (QoS) on a FortiSwitch involves several distinct stages to manage traffic priority and bandwidth. The specific process of taking identified packets and placing them into a specific priority buffer for transmission is known asQueuing.1 On FortiSwitch, when a frame enters an ingress port, it is first classified based on its incomingCoS(Layer 2) or DSCP(Layer 3) markings.2However, it is theQueuing for egress traffic (Option B)mechanism that dictates which of the eight available hardware queues the frame will reside in before it is sent out of the destination port. The switch uses a mapping table (such as a CoS-to-queue or DSCP-to-queue map) to ensure that high- priority traffic, like voice or video, is placed in a higher-priority queue to minimize latency and jitter.
Regarding the other options:Classification (Option A)is the initial identification of the packet's priority but does not perform the physical mapping to a buffer.Policing (Option C)is an ingress mechanism used to drop or remark traffic that exceeds a defined rate.Shaping (Option D)is an egress mechanism that smooths out traffic bursts by delaying packets but is separate from the initial queue assignment. Therefore, the act of mapping specific markings to an egress queue is a fundamental function of the queuing mechanism.

NEW QUESTION # 31
Refer to the exhibits. An IP phone is connected to port1 of FortiSwitch Access-1. The IP phone tags its traffic with VLAN ID 20. On FortiGate, VLAN IP_Phone (VLAN ID 20) has been configured, and port1 of Access-
1 is set with VLAN 20 as the native VLAN. However, the IP phone cannot reach the network. The exhibit shows the partial VLAN configuration and the port1 configuration on Access-1.
Which configuration change must you make on FortiSwitch to allow ingress and egress traffic for the IP phone? (Choose one answer)

A. On port1, disable the edge_port
B. On port1, add VLAN 20 to the allowed_vlans list
C. On VLAN IP_Phone, enable l2forward
D. On VLAN IP_Phone, enable vlanforward

Answer: B

Explanation:
According to theFortiSwitchOS 7.6 Administration GuideandFortiOS 7.6 FortiLink Guide, the processing of Ethernet frames on a managed FortiSwitch port depends on whether the frame is tagged or untagged upon arrival (ingress) and how the port's VLAN membership is defined.
In the provided exhibit,port1is configured with set vlan "IP_Phone" (VLAN 20) as itsnative VLAN. By definition, the native VLAN handles untagged traffic; any untagged frame arriving at the port is assigned to VLAN 20, and any egress traffic from VLAN 20 is sent out of the port without a tag. However, the scenario specifically states that theIP phone tags its traffic with VLAN ID 20.
When a FortiSwitch receives atagged frame, it checks the VLAN ID against theallowed-vlanslist configured on that port. Although VLAN 20 is the native VLAN, the exhibit shows that the port has been explicitly configured with set allowed-vlans "quarantine". This creates a restrictive filter that permits only tagged frames belonging to the "quarantine" VLAN to enter or exit the port. Because VLAN 20 (IP_Phone) is not present in the allowed-vlans list, the switch drops the tagged frames from the IP phone during ingress processing.
To resolve this, the administrator must modify theFortiSwitch port configurationby adding VLAN 20 to the allowed_vlans list (e.g., set allowed-vlans "quarantine" "IP_Phone" or set allowed-vlans-all enable). This ensures that the switch recognizes and permits tagged traffic for VLAN 20 on that physical interface. Option B is incorrect because l2forward is a Layer 3 interface setting on the FortiGate and does not address the physical port's ingress filtering logic on the switch. Disabling the edge_port (Option D) relates to Spanning Tree Protocol (STP) convergence and would not impact VLAN tag filtering.

NEW QUESTION # 32
Which three are valid actions that a FortiSwitch access control list (ACL) can apply to matching traffic?
(Choose three answers)

A. QoS
B. Quarantine devices
C. Assign the VLAN ID
D. Set outer VLAN tags
E. Traffic processing

Answer: A,D,E

Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theNSE 5 FortiSwitch 7.6 Administrator Study Guide, Access Control Lists (ACLs) are used to perform multiple actions on matching traffic as it passes through the switch pipeline. The documentation explicitly categorizes these valid actions into three distinct functional groups:Traffic processing,QoS (Quality of Service), andVLANmodifications.
* Traffic Processing (Option C):This is a primary category of ACL actions. It includes operations that dictate how a frame is physically handled or monitored. Valid specific actions under this category includedrop(discarding the packet),count(incrementing a packet counter for statistics),redirect (sending the packet to a specific interface or CPU queue), andmirror(copying the traffic to a monitor port).
* QoS (Option E):The QoS category allows the switch to manage traffic prioritization and bandwidth.
ACLs can be configured toset the egress queue(assigning a frame to one of the eight priority queues), remark CoS (Class of Service)orDSCP (Differentiated Services Code Point)values in the frame header, and applypolicersfor rate limiting.
* VLAN / Set outer VLAN tags (Option D):Under the VLAN category, the most notable action is the ability toset outer VLAN tagson frames. This is particularly useful in scenarios involving Q-in-Q tunneling or service provider environments where a secondary tag is required for transport across a managed fabric.
It is important to note thatAssign the VLAN ID (Option A)is typically a function ofNAC (Network Access Control)orDynamic VLAN Assignmentrather than a standard ACL action; within an ACL context, vlan-id is primarily used as aclassifier(to match traffic) rather than an action.Quarantine devices (Option B)is a high- level security response triggered by the FortiGate NAC engine and is not a direct action available within the FortiSwitch ACL configuration menu.

NEW QUESTION # 33
......

Some candidates may purchase our NSE5_FSW_AD-7.6 software test simulator for their companies. They will ask us how many personal computers our soft version can be install. In fact we have no limit for computer quantity. So if you purchase our NSE5_FSW_AD-7.6 software test simulator, it supports multi-users at the same time. It can be installed on computers without any limits. If you are a training school, it is suitable for your teachers to present and explain casually. Good NSE5_FSW_AD-7.6 software test simulator have high passing rate and Test4Engine are looking forward to your long-term cooperation.

New NSE5_FSW_AD-7.6 Test Topics: https://www.test4engine.com/NSE5_FSW_AD-7.6_exam-latest-braindumps.html